QUICK & MESS FREE
NO CONCRETE
NO DIGGING, NO DIRT
NO CONCRETE NO DIGGING, NO DIRT NO CONCRETE NO DIGGING, NO DIRT
Now a distributor of the
Driver comes with:
• standard 2 1/8" guide hammer
• quick release coupling & hose clamp to connect hose to driver
• 12mm brass tail & hose clamp to connect hose to compressor
• spare Set screws,, lock nuts & allen key
Used for driving in steel fencing posts, chain link fence posts, "T" posts, tent stakes, trellising posts, plastic posts, timber stakes, wood posts, 2 ",3 ",4 ".
To drive 2 " to 5 " water pipe a high tensile plug must be used in the top of the pipe and then transferred to the next pipe. Also drives roadside guide posts.
STRIKING HAMMER -A striking hammer is provided in the box with the driver.
OILING
Do not put oil in the tool, the only maintenance needed is spraying a W-D 40 type product in the tool at the end of the day to displace the moisture in the tool and prevent rust.
Digless Dave
CHISELS -Chisels are 1150mm long and fit directly into the driver. Anti-seize grease MUST be used on the shank of the tool.
PICK -Picks are 1150mm long and fit directly into the driver. Anti-seize grease MUST be used on the shank of the tool.
BEAD BREAKER -38mm long and fit directly into the driver. Anti-seize grease MUST be used on the shank of the tool. GUIDE POST DRIVE KITS -Drive kits are available for Dura-Post,Ezy-Drive and Smart posts. Other sized drive kits can be made to your needs.
GUIDES -The standard guide supplied is 54mm.Additional guides are available from 56mm to 145mm bore.
PLUGS TO SUIT -2 ",3 ",4 " and 5 " pipe. To be placed in the top of the pipe and then transferred to the next pipe.
PICKET POST PULLER -Can remove a T post from any sort of ground without bending the post. The operator can attach the puller to the base of the post without the need to bend down. The puller then works the post out of the ground with a straight vertical action always working at ground level. A simple mechanical tool, the puller is easily used by anyone and pays for itself by recovering your posts straight and ready to reuse.
PULLER JAW -Same jaw as the puller, to use on a chain on tractor /back hoe.
AIR HOSE -1/2 " air hose MUST BE USED or performance of the driver will be reduced.
PIPE ADAPTER - Use with post puller to remove pipe.
This website and all contents Copyright© 2010 Digless Fencing Solutions and may not be reproduced without permission.
This site designed by 2ndLook Graphic Design. For information about web design services contact info@2ndlookgraphics.com